How To Fix Broken iPhone Charger Tip

If the iPhone charger Tip is not working, first confirm that the problem is not with your iPhone or outlet. Once you have confirmed that the problem is with the charger itself, you can try to fix it with the guide given below.

If the charger is not completely broken, you may be able to fix it by bending a metal prong back into place. If the charger is completely broken and cannot be repaired by solder, you can try to replace it altogether with a new one.

How To Fix Broken iPhone Charger Tip Guide:

How To Fix Broken iPhone Charger Tip
  • To Fix Broken iPhone Charger Tip, you can try to fix it with superglue. First you should make sure that charger is completely dry and unplugged.
  • Next, put a small amount of superglue on the end of the charger where the tip is broken.
  • Finally, plug in your phone and wait for it to dry.
  • You can use a lighter to heat up the metal around the broken end of charger and quickly insert it into the phone.
  • Use a pen or small screwdriver to pry off the metal around the broken end of the charger and then reattach it using electrical tape; another way still is just taking out your trusty knife and slicing through it.

Learn How TO Fix Liquid Detected in Lightning Connector iPhone in This Guide.

Alternate Method:

  • To fix a broken iPhone charger port, follow these steps. First, turn off your iPhone by visiting Settings.
  • Use an air compressor to blow out dust from the charging port with a straw or other lint-free material.
  • Nail clippers are also useful for this step. Use these same tools to gently pry out any debris lodged in between the port’s metal pins.
  • If you can’t do these steps on your own, contact a 3rd party repair shop in your area.
  • If you have a bent, damaged, or otherwise unusable charging cable, you can straighten it using pliers.
  • Alternatively, you can cut the damaged portion of the charging cable using scissors.
  • The damaged portion of the cable may need to be replaced; if it is broken or if the charger itself is damaged.
  • Another option is to charge your iPhone using an external battery pack or USB port on your computer. However, these methods are not full proof to fix a broken charging cable.

How To Fix Broken iPhone Charger?

If your iPhone charger isn’t working, there are several troubleshooting steps you can take. One option is to solder a new circuit board onto the charging port. You can also try replacing your iPhone’s USB cable with another one in case the adapter or cable are causing the problem.

If this doesn’t fix the problem, it may be time to call a repair service to replace the device’s battery or other components. In cases where there is visible damage to the charging port itself, such as broken plastic or corrosion on metal contacts, you may need to have this replaced as well.

Charger heads can become faulty for many reasons. The wires have stripped insulation, or the wire shielding may be missing. If you can’t see it, the charger head can be broke, but fortunately, it’s still usable. After you found the faulty wire repair it using a cutting tool or a soldering iron. However, make sure to cut the charger head casing without damaging the wire inside.

Face ID Not Working in iPhone Checkout This Guide!

What Cause iPhone Charger To Break So Easily?

Charger Cables can break because they are bend and subjected to tension, gravity, or furniture. Jamming the cable accidentally against something can easily break the point connecting the plug to cable. Stretching your cable or adding tension can easily break your cable.

To avoid fraying and breakage, you can keep it flat; however, heat shrink tubing or paracord bracelets can reinforce your cable. Broken chargers can be a nuisance if they break; sometimes this occurs because of tripping by power sources.

The first step in fixing a broken charger is to check whether power is present; if not, then unplugging it may help fix the problem. If these steps fail, then replacing the charger may be necessary.

Magnetic charger cables are an ideal substitute for traditional charging cables. These cables offer the convenience of being able to quickly remove your iPhone from its holder, but some users may be concerned about the potential damage that could occur if they were to use a magnetic adapter.

If you don’t want to risk damaging your iPhone by using such a device, however, there are several other methods available for fixing your charging cable. One of these options is to use a wireless charger which is approve by Apple; this approach will allow you to avoid removing the entire phone from its case during charging sessions.

Delete Expired Subscription on iPhone Step By Step Guide!

Final Thoughts:

You can Fix Broken iPhone Charger Tip by using a pair of pliers. Remove the old tip from the cable with the pliers; insert the new one into place by crimping it in place with your hands.

If the tip of a charger is bend, try using pliers to straighten it. Use the pliers to gently straighten the tip after removing the plug from the wall. If that does not work; try using scissors to cut off the bent part of the tip and then use pliers to straighten it out.

You can replace or repair broken iPhone Charger yourself If the charging port on your phone or outlet is not damaged and the charger itself seems undamaged, inspect the prongs of the damaged one for damage before attempting to fix it yourself. If you find that none of the prongs are bent out of place, but rather are completely disconnected from one another, solder them back together with a soldering iron.

If You have broken phone charger port, you can still charge your phone by using a charging cable that has a USB connector on one end and a micro USB connector on the other. You can get these cables from electronic stores or online.

A bent plug is safe to use as long as it is still in good condition it may have happened if you accidentally stepped on the cord. You can charge an iPhone wirelessly with a wireless charging pad or adapter if your need is urgent enough that you cannot wait for your replacement part to arrive.

Leave a Comment